Overview of self-mixing interferometer applications to mechanical engineering

We present an overview of the applications of self-mixing interferometer (SMI) to tasks of interest for mechanical engineering, namely high-resolution measurement of linear displacements, measurements of angles (tilt, yaw, and roll), measurements of subnanometer vibrations, and absolute distance, all on a remote target-representative of the tool-carrying turret of a tool-machine. Along with the advantages of SMI-compactness, low cost, minimum invasiveness, ease of use, and good accuracy, we illustrate the typical performance achieved by the basic SMI sensors, that is, the versions requiring a minimum of signal processing and discuss special features and problems of each approach

Evaluation of Self-Mixing Interferometry Performance in the Measurement of Ablation Depth

This paper studies self-mixing interferometry (SMI) for measuring ablation depth during laser percussion drilling of TiAlN ceramic coating. The measurement performance of SMI was investigated in a large processing range producing blind microholes with depths below and beyond the average coating thickness. Signal characteristics of the measurement system were evaluated indicating sources of disturbance. The SMI measurements were compared with a conventional measurement device based on focus variation microscopy to evaluate the measurement error. The measurement error classes were defined, as well as defining the related error sources. The results depict that the measurement error was independent of the processing condition, hence the hole geometry and ablation rate. For 76% of cases, measurement error was below the intrinsic device resolution obtainable by simple fringe counting of half a wavelength (λ/2 = 0.393 μm)

Optical proximity sensor based on self-mixing interferometry

A proximity detector based on self-mixing technique, well suited for different industrial applications, is demonstrated. Instead of using a light-source plus a detector, the proposed sensor is realized by a single laser source. Two different physical effects in the laser diode allow for a continuous detecting range, from 10 mm up to 80 mm. The main advantages of the sensor are target detection from just one point of view; multiple sensors configuration does not need optical filters; separation of source and detector is eliminated; and background rejection is intrinsically given by the self-mixing effect, which shows a sharp cut-off after the focus

Application of self-mixing interferometry for depth monitoring in the ablation of TiN coatings

Among possible monitoring techniques, self-mixing interferometry stands out as an appealing option for online ablation depth measurements. The method uses a simple laser diode, interference is detected inside the diode cavity and measured as the optical power fluctuation by the photodiode encased in the laser diode itself. This way, self-mixing interferometry combines the advantages of a high resolution point displacement measurement technique, with high compactness and easiness of operation. For a proper adaptation of self-mixing interferometry use in laser micromachining to monitor ablation depth, certain optical, electronical, and mechanical limitations need to be overcome. In laser surface texturing of thin ceramic coatings, the ablation depth control is critically important to avoid damage by substrate contamination. In this work, self-mixing interferometry was applied in the laser percussion drilling of TiN coatings. The ∼4 μm thick TiN coatings were drilled with a 1 ns green fiber laser, while the self-mixing monitoring was applied with a 785 nm laser diode. The limitations regarding the presence of process plasma are discussed. The design criteria for the monitoring device are explained. Finally, the self-mixing measurements were compared to a conventional optical measurement device. The concept was validated as the measurements were statistically the same

Yb,Er:glass Microlaser at 1.5 μm for optical fibre sensing: Development, characterization and noise reduction

A fiber-pumped single-frequency microchip erbium laser was developed and characterized with the aim of using it in coherent Optical Time Domain Reflectometry (OTDR) measurements and sensing. The laser is pumped by a fiber-coupled 976 nm laser diode and provides 8 mW TEM00 single-frequency output power at 1.54 μm wavelength, suitable for efficient coupling to optical fibers. The amplitude and phase noise of this 200 THz oscillator were experimentally investigated and a Relative Intensity Noise (RIN) control loop was developed providing 27 dB RIN peak reduction at the relaxation oscillation frequency of 800 kHz

Yb,Er:glass Microlaser at 1.5 µm for optical fiber sensing: development, characterization and noise reduction

A fiber-pumped single-frequency microchip erbium laser was developed and characterized with the aim of using it in coherent Optical Time Domain Reflectometry (OTDR) measurements and sensing. The laser is pumped by a fiber-coupled 976 nm laser diode and provides 8 mW TEM00 single frequency output power at 1.54 µm wavelength, suitable for efficient coupling to optical fibers. The amplitude and phase noise of this 200 THz oscillator were experimentally investigated and a Relative Intensity Noise (RIN) control loop was developed providing 27 dB RIN peak reduction at the relaxation oscillation frequency of 800 kH

Roadmap on signal processing for next generation measurement systems

Signal processing is a fundamental component of almost any sensor-enabled system, with a wide range of applications across different scientific disciplines. Time series data, images, and video sequences comprise representative forms of signals that can be enhanced and analysed for information extraction and quantification. The recent advances in artificial intelligence and machine learning are shifting the research attention towards intelligent, data-driven, signal processing. This roadmap presents a critical overview of the state-of-the-art methods and applications aiming to highlight future challenges and research opportunities towards next generation measurement systems. It covers a broad spectrum of topics ranging from basic to industrial research, organized in concise thematic sections that reflect the trends and the impacts of current and future developments per research field. Furthermore, it offers guidance to researchers and funding agencies in identifying new prospects.AerodynamicsMicrowave Sensing, Signals & System